(1) Strictly control the entry and exit of vehicles carrying mixtures, and prohibit the vehicle from turning sharply, braking, and dumping the mixture scraps on the grille layer to prevent damage to the glass fiber grille.
(2) The glass fiber grid adhesive is easily soluble in water. Do not apply when it is rainy or wet.
(3) The glass fiber grid is made of glass fiber, which is prone to irritate human skin. Construction workers must wear protective gloves.
(4) When the rubber roller is used to inject water to increase its weight, the amount of water injected should not be too full to prevent it from overflowing onto the glass fiber grid and causing its back and belly to lose viscosity.
(5) During the laying of the glass fiber grid, if it is found that there are smaller potholes on the original road surface that have not been filled first, you can cut out the corresponding potholes on the paved grid to mix the asphalt on the pavement When the material is filled, the pit can be completely filled.
(6) When the grid is laid, the road temperature is required to be between 5 ° C and 60 ° C.