application:
Biaxial plastic geogrid is suitable for various embankment and road foundation reinforcement, slope protection, cave wall reinforcement, large airport, parking lot, wharf and other load-bearing foundation reinforcement.
1. It is used to increase the bearing capacity of the road and prolong the service life of the road (foundation).
2. It is used to prevent the road from collapsing or cracking, and keep the ground beautiful and clean.
3. Simple and easy to operate, saving time and cost
4. Biaxial geogrid is used to prevent culvert cracking.
5. The soil slope is reinforced with biaxial geogrid to prevent soil erosion.
6. The use of biaxial geogrid reduces the thickness of the cushion and saves costs.
7. The biaxial geogrid is used to support the stability of the slope mat and to green the environment.
Construction method:
Excavate the bed, set up a sand cushion (the height difference does not exceed 10cm), grind it into a platform, and lay a grid. The longitudinal direction should be consistent with the direction of the main force. The longitudinal overlap is 15-20 cm, and the lateral direction is 10 cm. The overlap is tied with plastic tape. On the laid grid, it is fixed on the ground with U-shaped nails every 1.5-2m. The laid geogrid should be backfilled with soil material in time. The number of layers of the laid geogrid depends on the technology. Geogrid laying depends on technical requirements.
